FX SERIES

HORIZONTAL-VERTICAL SYSTEMS

FX SERIES HORIZONTAL-VERTICAL SYSTEMS

FX SERIES HORIZONTAL-VERTICAL SYSTEMS

The FX Horizontal–vertical systems are designed to ensure maximum versatility in load handling across different operating positions. Ideal for complex industrial environments, they enable safe management of both horizontal and vertical transport, easily adapting to production requirements. Thanks to the possibility of adjusting the height and center of gravity of the lifter, these systems provide optimal control throughout all handling phases. The robust and stabilized structure ensures long-term reliability, while dedicated design solutions allow for practical and safe use even in the most demanding applications.

Vegatechnik staff will be glad to assist you in customizing products tailored to your needs.

DISCOVER COMPLETE RANGE
DOWNLOAD CATALOGUE

Complete Range FX PERMANENT MAGNETIC TRUSSES

Horizontal-Vertical systems

FX HV

Horizontal-Vertical system from 150 to 3000Kg
The FX HV horizontal-vertical system is the ideal solution for transporting parts from horizontal to vertical or in reverse order. Special dimensions are available on request.

Available Products FX HV
FX HVS

Tilting horizontal-vertical system
The FX HVS systems allow the suspended load to be rotated by 90° The load supported by magnetic lifters can change position from horizontal to vertical at any time.

Available Products FX HVS
FX HV HVS

SPECIAL SOLUTIONS
Vega Technik will assist you in designing and manufacturing special accessories tailored to your specific needs.

Samples applications

FAQs

TECHNICAL AND OPERATING
INFORMATIONS

The contact surface between the magnetic lifter and the load must be clean and free from irregularities of any kind

A distance between the magnetic pole of the lift and the load to be moved creates an air gap. Rust, paint, dirt, paper or an irregularly worked surface can create air gaps, the force of the lifter is inversely proportional to the thickness of the air gap.

Material thickness

The path of the magnetic flux inside a piece consists of a semicircle that starts from the center of a pole of the magnetic lifter to the center of the opposite pole. If the piece is thinner than this radius, the part of the flow that comes out is dispersed and does not contribute to anchoring it. The resulting attraction will be less than what you will get when all the flow is absorbed by a piece of adequate thickness to contain it.

Load dimensions / intrinsic balance

Contact surface, thickness and length of the material to be handled are factors that influence the attraction force of a magnetic lifter. We recommend consulting our technicians to check the suitability of the lift chosen for your application.

Chemical composition of the load

The chemical composition of the load to be lifted can also influence the attraction force of a magnetic lifter, depending on its magnetic permeability. Common steels (ST37-52) with low carbon content have good magnetic permeability. Alloy steels with a content of non-ferrous components have a low magnetic permeability. Hot treatments that modify the molecular structure of steel can also reduce magnetic permeability. The more a steel is "tied", the worse the magnetic response and the higher the possibility of having residual magnetism in the piece.

Temperature of the load

As the temperature increases, the molecules of the ferromagnetic material move faster, this phenomenon causes a reduction in the magnetic conductivity of the material itself. Recommended operating temperatures are for loads up to max. 80 ° C. In the case of the FX-V lift, the max. operating temperature is 150 ° C.

Check the magnetic lifters

The FX series lifts are delivered with a manufacturer's declaration of conformity which guarantees compliance with the MD 2006/42 EC and EN 13155 standards. An additional check must be carried out for particular situations (blows, collisions, breakages) DGUV / BGR 500 / Chapter 2.8. A regular check must be carried out with a minimum annual deadline according to DGUV / BGR 500 / Section 2.8.
We will be glad to verify your magnetic lifters at our office. We are always equipped with all spare parts, in the event of breakage, the lifts will be restored quickly.