Vega Technik GmbH | Magnets Austria Villach | Magnetic materials and components | Mechanical assemblies and integrated electronic systems

FXL-50

FOR MILLING OF WORKPIECES WITH MEDIUM-LOW THICKNESS

Version with 50 x 50 mm poles for any type of machining of small and medium-sized workpieces. They generate a field that penetrates about 12 mm into the workpiece, ensuring uniform clamping. The nominal holding force is approximately 160 N/cm² = 4 kN per pole. The surface can be used with control units at 400 V with a 4-pin / 28 mm bayonet connector.

FXL-50

Available models

Model	Dimensions			Poles	Weight	Control unit
Model	Width	Length	Height	Poles	Weight	Control unit
FXL 203/50	320 mm	198 mm	66 mm	8	30 Kg	FXL-C
FXL 204/50	440 mm	198 mm	66 mm	12	42 Kg	FXL-C
FXL 206/50	350 mm	198 mm	66 mm	18	62 Kg	FXL-C
FXL 303/50	320 mm	320 mm	66 mm	16	48 Kg	FXL-C
FXL 304/50	430 mm	320 mm	66 mm	24	60 Kg	FXL-C
FXL 305/50	500 mm	320 mm	66 mm	24	75 Kg	FXL-C
FXL 306/50	630 mm	320 mm	66 mm	32	96 Kg	FXL-C
FXL 308/50	800 mm	320 mm	66 mm	40	121 Kg	FXL-C
FXL 404/50	392 mm	392 mm	66 mm	25	73 Kg	FXL-C
FXL 406/50	620 mm	392 mm	66 mm	40	115 Kg	FXL-C
FXL 408/50	810 mm	392 mm	66 mm	50	150 Kg	FXL-C
FXL 410/50	1120 mm	392 mm	66 mm	70	210 Kg	FXL-C
FXL 505/50	500 mm	460 mm	66 mm	36	110 Kg	FXL-C
FXL 506/50	650 mm	460 mm	66 mm	48	150 Kg	FXL-C
FXL 508/50	810 mm	460 mm	66 mm	60	176 Kg	FXL-C
FXL 510/50	1120 mm	460 mm	66 mm	84	250 Kg	FXL-C
FXL 606/50	650 mm	580 mm	66 mm	64	175 Kg	FXL-C
FXL 608/50	800 mm	580 mm	66 mm	80	220 Kg	FXL-C
FXL 610/50	1120 mm	580 mm	66 mm	96	310 Kg	FXL-C
FXL 612/50	1258 mm	580 mm	66 mm	128	350 Kg	FXL-C
Other models and sizes available on request