FXE 50
Electro-permanent magnetic lifters equipped with Pole Type 50
Electro-permanent magnetic lifters equipped with Pole Type 50 with a load capacity from 150 to 1600 kg. Pole Type 50 is designed to lift materials starting from 4 mm thick with flat surfaces. The load ratings are calculated with an air gap of 0.3 mm. With an air gap of 0 mm, Pole Type 50 achieves a holding force of 3.8 kN per pole.
FXE 50
Available models
| Model | Max. Load | Poles | Magnetic Anchoring surface | Weight | ||
|---|---|---|---|---|---|---|
| From Thikness | Load | Type | Quantity | |||
| FXE-150.50 (230V / 50Hz) | 15 mm | 150 Kg | 50 | 2 | 52 x 116 mm | 16 Kg |
| FXE-300.50 | 15 mm | 300 Kg | 50 | 4 | 116 x 116 mm | 23 Kg |
| FXE-500.50 | 15 mm | 500 Kg | 50 | 6 | 180 x 116 mm | 31 Kg |
| FXE-750.50 | 15 mm | 750 Kg | 50 | 8 | 244 x 116 mm | 27 Kg |
| FXE-1100.50 | 15 mm | 1100 Kg | 50 | 12 | 372 x 116 mm | 39 Kg |
| FXE-1600.50 | 15 mm | 1600 Kg | 50 | 18 | 564 x 116 mm | 57 Kg |
| Safety factor 3 | Test Method EN 13155 | Max Operating Temperature 80 °C | ||||
Complete Range FXE
Lightweight
FXE 50
Electro-permanent magnetic lifters equipped with Pole Type 50 with a load capacity from 150 to 1600 kg.
FXE 50+
Permanent-electromagnetic lifters equipped with Pole Type 50+ with a load capacity of 150 to 2400 kg.
FXE L
Permanent-electromagnetic lifters in long narrow design equipped with Pole Type 50+ with a load capacity of 400 to 1000 kg.
FXE 50
FXE 50 at work
